Now showing items 1-17 of 17

    • 1v rail to tail operational amplifier design for sample and hold circuits 

      Kumar, Mahesh (Dhirubhai Ambani Institute of Information and Communication Technology, 2009)
      At low voltage, the input common mode voltage of Operational amplifier is limited which restricts its use as a buffer. This works deals with designing a rail to rail amplifier. The Thesis presents a 1V rail to rail operational ...
    • Adaptive biased switched capacitor filters 

      Bajaj, Garima (Dhirubhai Ambani Institute of Information and Communication Technology, 2008)
      The demand from today’s handheld devices, such as laptop, ipod, cellphones is to have a long battery life with no compromises in speed. The devices dissipate power even in standby mode also. Op-amp is a major block in all ...
    • Analysis of charge injection in a MOS analog switch with impedance on source side 

      Rao, D. Srinivas (Dhirubhai Ambani Institute of Information and Communication Technology, 2012)
      Turning off of a transistor introduces error voltage at the output of Sample and Hold circuits which are the key components of Analog to Digital Converters (ADCs) and hence limits their accuracy of performance in high ...
    • Asynchronous analog to digital converter 

      Patel, Vidyut A. (Dhirubhai Ambani Institute of Information and Communication Technology, 2011)
      Nowadays, asynchronous systems are becoming more popular for low power applications. Asynchronous Systems help to reduce metastability errors and clock skew errors. This thesis is about an asynchronous analog to digital ...
    • Design & layout of a low voltage folding & interpolation ADC for high speed applications 

      Tiwari, Sandeep Kumar (Dhirubhai Ambani Institute of Information and Communication Technology, 2012)
      Analog to Digital Converters (ADC) and Digital to Analog Converters (DAC) plays a vital role in mixed analog signalling, communication and digital signal processing world. Now a day, the demand for designing of high ...
    • Design methodology for architecting application specific instruction set processor 

      Desai, Meghana (Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
      Application Specific Instruction-set Processors (ASIP), also referred as extensible processors, represent the state-of-the-art microprocessor architecture. ASIPs are practically leading towards the realization of ...
    • Design of low voltage high performance, wide bandwidth current feedback amplifier with complementary input pair 

      Dubey, Divya (Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
      This thesis presents the work done on the design of a low voltage high performance, wide bandwidth current feedback amplifier [CFA] with complementary input pair. The design is carried out in 1.8 V, 0.18 micron CMOS process. ...
    • Designing of an efficient power clock generation circuit for complementary pass-transistor adiabatic logic carry save multiplier 

      Ranjith, P (Dhirubhai Ambani Institute of Information and Communication Technology, 2008)
      This thesis presents a novel four-phase power clock generator for low power adiabatic logic without using inductors. The power clock generator is designed using current mirror arrangement of PMOS and NMOS transistors. ...
    • Frequency compensation technique for low voltage three stage operational amplifier 

      Kunde, Raju (Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
      This thesis presents a new frequency compensation technique for low supply voltage three-stage operational amplifier at higher loads. It is based on the miller splitting and pole-zero cancellation using feed-forward path. ...
    • Investigation of low power design of left-right leap frog array multiplier 

      Sankar, K. Ravi (Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
      This thesis addresses the Low Power design of 12 bit LRLFAM at the Layout, circuit and logic levels. A new Low power Booth-Recoder (BR), and Multiplexer based partial product generated are designed using pass-Transistor ...
    • Low drop-out (LDO) voltage regulator without off-chip capacitor 

      Agarwal, Gopal (Dhirubhai Ambani Institute of Information and Communication Technology, 2009)
      Designing of Low Drop-Out Voltage Regulators (LDOs) operating without a large off-chip capacitor, having a very good transient response and maintaining the loop stability for full load current range in low supply voltage ...
    • Low power microprocessor design 

      Bhatt, Vishal (Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
      This research work tries to reduce the power consumption of a processor with signal processing features. For low power design, focus is on developing ‘Low power synthesizable Register File’, as the initial study shows that ...
    • Low-power multi-ported register file for digital signal processors 

      Aguduri, Nagamanoj Kumar (Dhirubhai Ambani Institute of Information and Communication Technology, 2011)
      Digital Signal Processors (DSPs) also come under the category of processors in which Multi-ported register files can find their applications widely. Most of the DSP applications do not benefit from further speeding-up after ...
    • Novel 7T SRAM cell design for low power cache applications 

      Joshi, Srawan Kumar (Dhirubhai Ambani Institute of Information and Communication Technology, 2012)
      Scaling in integrated circuit technology directly paves way to increased package density, thereby increasing onchip power. With continuous scaling, low power design techniques results in efficient use of silicon die. ...
    • Study of power in CR-SRAM in context of precharge reference voltage. 

      Rupapara, Kripal D. (Dhirubhai Ambani Institute of Information and Communication Technology, 2013)
      In Morden times power dissipation in electronic circuits has become more important due to increase use of portable and handheld devices. Increased operating frequency results in more power consumption in almost every VLSI ...
    • Study of the effectiveness of various low power techniques on sequential and combinational gate dominated designs 

      Rana, Kunj (Dhirubhai Ambani Institute of Information and Communication Technology, 2012)
      In last decade, the technological advancement is seen in semiconductor field like never before. The need for low power has caused a major paradigm shift where power dissipation has become as important consideration as ...
    • Tool to calculate the width and length of capacitor for switched-capacitor band pass filter 

      Doshi, Kaushal J. (Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
      The switched capacitor (SC) circuits find their applications in many fields. Due to their lower size at low frequencies, higher density can be achieved compared to active RC counterparts. Still there are nonlinerarities ...