Search
Now showing items 1-10 of 26
Design of low power and high speed decoder for 1MB memory
(Dhirubhai Ambani Institute of Information and Communication Technology, 2008)
Technology scaling is accompanied by rise in leakage power dissipation. This thesis proposes a voltage controllable circuit in the feedback path of the decoder, which drastically reduces the standby leakage current with ...
Design of the analog front end circuit for X-ray detectors
(Dhirubhai Ambani Institute of Information and Communication Technology, 2009)
The Thesis presents a novel idea to efficiently read out the value corresponding to incident X-Ray, from X-Ray sensor. A system level solution has been proposed which is unique in itself in terms of approach. A simple ...
Column decoder for memory redundant cell array
(Dhirubhai Ambani Institute of Information and Communication Technology, 2010)
As the semiconductor technology advances, the yield of memory chip is reducing. The cause of yield degradation is errors in manufacturing process associated with tight geometries. The thesis work proposes a redundancy ...
Investigation of low power design of left-right leap frog array multiplier
(Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
This thesis addresses the Low Power design of 12 bit LRLFAM at the Layout, circuit and logic levels. A new Low power Booth-Recoder (BR), and Multiplexer based partial product generated are designed using pass-Transistor ...
Design of low-voltage, low-power, wide-band CMOS LC VCO using active inductors
(Dhirubhai Ambani Institute of Information and Communication Technology, 2008)
In this thesis the design of low-voltage, low-power, wide-band CMOS LC VCO using active inductor has been proposed. The oscillator is based upon the classic LC-tuned negative-resistance topology, with a novel active inductor ...
Asynchronous analog to digital converter
(Dhirubhai Ambani Institute of Information and Communication Technology, 2011)
Nowadays, asynchronous systems are becoming more popular for low power applications. Asynchronous Systems help to reduce metastability errors and clock skew errors. This thesis is about an asynchronous analog to digital ...
Adaptive analog line driver using digital tuning
(Dhirubhai Ambani Institute of Information and Communication Technology, 2010)
Transmission lines are widely used for transmitting electrical signals. A line driver is a part of the analog front-end transmitter for wired line communication. It is a voltage buffer that provides the necessary output ...
Area reduction in 8 bit binary DAC using current multiplication
(Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
A proposed current multiplication technique is applied on 8 bit binary current steering Digital-to -Analog Converters with LSB 150 μA, to reduce area. MSB 1 and MSB 2 current are first kept half to reduce area and then ...
Capacitor mismatch in switched capacitor circuits, techniques to minimize mismatch
(Dhirubhai Ambani Institute of Information and Communication Technology, 2011)
This thesis about the designing of capacitive mismatch insensitive switched capacitor amplifier for analog to digital converters (ADC). The accuracy of the conversion is an important factor. The accuracy depends upon the ...
CMOS RFIC mixer design
(Dhirubhai Ambani Institute of Information and Communication Technology, 2007)
A CMOS RF (Radio Frequency) up/down conversion mixer results in a reasonable increase in transceiver integration and a reduction in cost. The design of mixers faces many compromises between conversion gain(GC), local ...